Husqvarna Wacker Neuson CRT60-74LX, Operator'S Manual

Page: 84 / 136

wc_tx004005gb_FM10.fm
84
Engine Maintenance: Kohler (T4f)
7 Engine Maintenance: Kohler (T4f)
The information in this chapter comes from copyrighted Kohler material.
The viscosity of the engine oil is an important factor when determining the correct
engine oil to use in your machine. Use an engine oil of appropriate viscosity based
on the expected outside air temperature. See the table below.
WARNING
Most used liquids from this machine such as oil, gasoline, grease, etc., contain
small amounts of materials that can cause cancer and other health problems if
inhaled, ingested, or left in contact with skin for prolonged periods of time.
► Take steps to avoid inhaling or ingesting used liquids.
► Wash skin thoroughly after exposure to used liquids.
770075
characteristic.
Tab. 1.2
SAE VISCOSITY 5W-30 / 10W-40
LOW S.A.P.S. API CJ4
WITH SPECIFICATIONS
ACEA E6-E9
1.4 Oil
•
Important
•
The engine may be damaged if operated with improper oil
level.
Do not exceed the MAX level because a sudden increase in
•
engine rpm could be caused by its combustion.
Use only the recommended oil to ensure adequate protection,
•
efficiency and service life of the engine.
•
the engine life.
The use of lubricants other than recommended may shorten
Viscosity must be appropriate to the ambient temperature to
•
Danger
which the engine is to be exposed (Par. 1.4.1) .
•
Prolonged skin contact with the exhausted engine oil can
cause cancer of the skin.
If contact with oil cannot be avoided, thoroughly wash your
•
hands with soap and water as soon as possible.
and SCRAPPING.
For the exhausted oil disposal, refer to Par. 5.6 DISPOSAL
N. B. : Low S.A.P.S. technology (fuel with low Sulphate, Phosphorous, Sulphur content) keeps catalyst in working conditions.
• In the SAE classification, oils are identified according
•
to viscosity without considering any other qualitative
The code is-made up of two numbers. The first number refers
to the viscosity when cold, for use during winter (" W "= winter),
while the second number is for viscosity at high temperatures.
E6
E9
Long drain LOW S.A.P.S.
Long drain MID S.A.P.S.
RECOMMENDED OIL
CLASSIFICATION DESCRIPTION ACEA SPECIFICATION