28
SERVICE SCHEDULE
Every 30 operating hours
Every 20 operating hours
Every 10 operating hours/after every race
Once after 1 operating hour
Check the screws and nuts for tightness.
Change the fuel screen. (
0
p. 112)
Check the fuel pressure. (
0
p. 106)
Check idle.
Final check: Check the vehicle for safe operation and take a test ride.
Read out the fault memory after the test ride using the Husqvarna Motorcycles diagnostics
tool.
Make the service entry in the
Husqvarna Motorcycles Dealer.net
and in the Service and
Warranty Booklet.
o
One-time interval
•
Periodic interval
28.3
Recommended work
0
0
0
0
0
0
I
•
I
•
I
•
•
I
•
I
•
•
I
•
I
•
•
I
•
I
•
•
I
•
I
•
•
I
•
I
•
•
I
•
I
•
Annually
Every 100 operating hours
Every 50 operating hours
Every 40 operating hours
Every 30 operating hours
Once after 20 operating hours
Change the front brake fluid. (
0
p. 146)
Change the rear brake fluid. (
0
p. 153)
Change the hydraulic clutch fluid.(� p. 241)
Lubricate the steering head bearing. (
�
p. 44)
Conduct a major fork service. (
0
p. 1 7)
Service the shock absorber. (
0
p. 68)
Change the fuel filter. (
�
p. 109)
Perform minor engine service, engine has been installed. (Change spark plug and
spark plug connector. Change piston, check and measure cylinder; check cylin-
der head. Check the camshaft, rocker arm and rocker arm shafts. Check timing
assembly.)
Perform major engine service including removing and installing engine. (Change
valves, valve springs, valve spring seats, and valve spring retainers. Change the
connecting rod, conrod bearing, and crank pin. Check the transmission and shift
mechanism. Check the oil pressure regulator valve. Change the suction pump.
Check the force pump and lubrication system. Change timing chain. Change all
engine bearings. Change the shaft seal rings and bearing seals of the main bear-
ing.)
o
One-time interval
•
Periodic interval
278
0
I
I
•
•
I
I
•
I
•
•
•
I
I
•
•
•
•
