Thrust surface, clutch facing discs in outer clutch
hub
If the thrust surface exhibits excessive wear:
:S 0.5 mm (:S 0.02 in)
-
Change the clutch facing discs and the clutch basket.
-
Check needle bearing Gi) and collar bushing
G,
for damage and wear.
If there is damage or wear:
-
Change the needle bearing and collar bushing.
-
Check clutch facing discs
48
for discoloration and scoring.
If there is discoloration or scoring:
-
Change all clutch facing discs.
-
Check the thickness of the clutch pack.
Clutch pack - thickness
Wear limit
;;,: 26.4 mm (;;,: 1 .039 in)
If the clutch pack does not meet specifications:
-
Change the clutch pack.
-
Check intermediate clutch discs
41)
for damage and wear.
If the intermediate clutch discs are not level and are pitted:
-
Change all intermediate clutch discs.
17.4.37 Checking the shift mechanism
-
Check shift forks
O
on plate
6)
for damage and wear (visual check).
If there is damage or wear:
-
Change the shift fork.
-
Check shift grooves G) of shift drum
8
for wear.
If the shift groove is worn:
-
Change the shift drum.
-
Check the seat of the shift drum in bearing
8.
311600-10
17 ENGINE
211
