17 ENGINE
17.4.36 Checking the clutch
- Check clutch push rod
O
for damage and wear.
If there is damage or wear:
- Change the clutch push rod.
- Place clutch push rod
8
on a flat surface and check for run-out.
If there is run-out:
- Change the clutch push rod.
- Check the length of clutch springs
@).
306625-10
I
Clutch spring - length
I 45.60 ... 46.80 mm (1. 7953 ... 1 .8425 in)
If the clutch spring length is shorter than specified:
- Change all clutch springs.
- Check the contact surface of pressure cap
C,
for damage and wear.
If there is damage or wear:
- Change the pressure cap.
- Check inner clutch hub
0
for damage and wear.
If there is damage or wear:
- Change the inner clutch hub.
- Check sleeves
(D
for damage and wear.
If there is damage or wear:
- Change the sleeves.
- Check outer clutch hub @ for damage and wear.
If there is damage or wear:
- Change the outer clutch hub.
- Check washer
fD
for damage and wear.
If there is damage or wear:
- Change the washer.
- Check the thrust surfaces of the clutch facing discs in clutch basket
0
for wear.
210
