Husqvarna DXR300, Operator'S Manual

Page: 28 / 60

28 –
English
TOOLS
General
The machine can be used with the following tools or
accessories marketed by Husqvarna
Bucket 85 L
The bucket is designed to move material. It is not designed for
use as a lifting implement.
Hydraulic hammer SB 202 *
The hydraulic hammer is designed for demolition by means of
hewing. It is not designed for use as a crowbar. Continuous
hewing with the hydraulic hammer can result in high
temperatures in the hydraulic system.
* or tools with comparative data.
Concrete cutter DCR300
The concrete cutters are designed to crush and cut material
in their jaws. They are not designed for pulling and prizing
loose material.
External tool
External hydraulic tools can be connected to the machine.
External tool is activated from the service menu. See
instructions in the section "Settings".
Work mode
In the work menu you can choose to work with either a
breaker or a concrete crusher. Other tools can be activated
from the Work menu under the tab "Adjustable". See
instructions in the section "Settings".
!
CAUTION! Please read the operator’s manual
carefully and make sure you understand the
instructions before using the machine. You
should also read and understand the manual
that accompanies the tool.
Ensure that the tool’s and the machine’s
performance (weight, hydraulic pressure,
flow etc) are compatible.
NOTICE! There is a risk of damage to the machine if, for
example, the work pressure is delivered to a single-acting
tool’s return side, or if the machine’s or the remote control’s
settings are not correct for the tool in question. There is
more information about the remote control’s settings in the
'Control system” section.