English
– 25
OPERATION
Operating modes
The machine can be operated in three different modes: work mode, set-up mode and transport mode. All commands in each of
the modes are described in this section.
•
Work mode - In this mode you can operate everything except the caterpillar tracks and outriggers.
•
Set-up mode - In this mode you can operate the caterpillar tracks and outriggers.
•
Transport mode - In this mode you can operate the caterpillar tracks and some arm functions.
If no controls have been used for 3 seconds, the machine will go to circulating pump mode. In this mode, the hydraulic oil is pumped
to the tank and there will be no pressure in the cylinders.
Key to commands
1
Right and left button on left joystick
2
Right and left button on right joystick
3
Direction joystick
4
Left and right joystick respectively
Designation of the machine’s parts
1
Arm 1
2
Arm 2
3
Arm 3
4
Tools
5
Outriggers
6
Caterpillar tracks
7
Tower
Summary of Contents for DXR300
Page 55: ...English 55 TECHNICAL DATA 4868 192 2368 93 5231 206 1818 72 ...
Page 58: ......
Page 59: ......
Page 60: ... z X16 6y 2013 09 25 z X16 6y 1156172 26 GB Original instructions ...
