Husqvarna DXR300, Operator'S Manual

Page: 17 / 60

English
– 17
SAFETY INSTRUCTIONS
Protective equipment
Personal protective equipment
Always wear:
• Protective helmet.
• Hearing protection.
• Protective goggles or a visor.
• Tight-fitting, heavy-duty and comfortable clothing that
permits full freedom of movement.
• Protective gloves.
• Sturdy, non-slip boots or shoes.
• A breathing mask, gas mask or fresh air helmet must be
used when working in environments where the air can be
harmful to health.
• Always have a first aid kit nearby.
Other protective equipment
• Fall protection must be used when working at height or if
there is a risk of collapse. The operator and the machine
must be safeguarded with separate fall protection.
• Screening equipment and modified protective clothing
must be used when working in hot environments.
• Barriers must be used to inform people in the vicinity of
the machine’s risk area.
• Equipment must be used to secure machine parts during
maintenance and service.
General safety warnings
The machine is used in a large range of environments and for
different types of work, making it impossible to forewarn of all
risks. Always exercise care and use your common sense.
Avoid all situations which you consider to be beyond your
capability. If you still feel uncertain about operating
procedures after reading these instructions, you should
consult an expert before continuing.
Do not hesitate to contact your dealer if you have any more
questions about the use of the machine. We will willingly be of
service and provide you with advice as well as help you to use
your machine both efficiently and safely.
Use the safety instructions as guidelines and support so that
you can detect possible risks yourself and take measures to
prevent them.
Let your Husqvarna dealer regularly check the machine and
make essential adjustments and repairs.
Management and operator
The management and the operator are responsible for
identifying and preventing risks to ensure staff and equipment
are not exposed to danger.
Responsibility
It is the responsibility of the management and the
operator to confirm:
• National and local laws, regulations and other directions
are followed. This might concern protective equipment,
limit levels for noise, barriers, etc.
• The operator has the relevant training and experience to
be able to perform the work safely.
• Unauthorized persons are not permitted to enter areas
where there is a risk of accidents.
• Nobody is permitted to be within the machine’s risk area
when work is underway.
• Persons who are admitted to the work area are trained in
and have access to protective equipment.
• The machine is used solely for the functions for which it is
intended.
• The machine is used safely.
• The machine is correctly connected to a suitable power
supply and correctly fused.
• The operator is informed of the work area surroundings,
e.g. strength in the floor structure, positioning of load-
bearing walls, cables and pipes.
Requirements of the operator:
• The operator must be given sufficient information and
training to have satisfactory knowledge of the machine’s
functions, properties and limitations.
• The operator must try to foresee risky elements of the job
and assess the machine’s risk area. Always exercise
caution and use common sense!
• It is the responsibility of the operator to suspend work with
the machine if a safety risk arises and ensure that the
machine is not used by mistake. The machine must not be
put into operation before the safety risk has been
eliminated.
• The operator must not be under the influence of drugs or
anything else that can affect his/her reactions or
judgement.
• The operator must use protective equipment suited for the
particular work situation.
• The operator must ensure that the machine cannot be
used by unauthorized persons, e.g. do not leave the
remote control unattended.
!
WARNING! You must use approved personal
protective equipment whenever you use the
machine. Personal protective equipment
cannot eliminate the risk of injury but it will
reduce the degree of injury if an accident
does happen. Ask your dealer for help in
choosing the right equipment.
!
WARNING! Please read the operator’s
manual carefully and make sure you
understand the instructions before using the
machine.