Husqvarna DXR300, Operator'S Manual

Page: 26 / 60

26 –
English
OPERATION
Work mode
Rotate tower
anticlockwise
Rotate tower
clockwise
Arm 1 in
Arm 1 out
Arm 2 down
Arm 2 up
Arm 1 and arm 2
out
Arm 1 and arm 2 in
Arm 3 up
Arm 3 down
Angle tool
inwards*
Angle tool
outwards*
Adjustable
pressure/flow to
hydraulic tool
(hammer/cutter)
Full pressure/flow
to hydraulic tool
(hammer/cutter)
Cutters open/
close**
* The function
works even if the
right button on the right joystick is depressed. This can be
useful if you simultaneously want to run arm 1 and 2 in
parallel.
** The button that opens/closes the cutters varies depending
on which type of cutters are being used.
Extra function
For activation, see instructions in the 'Settings' section under
the heading 'Extra features'.
Extra 1, direction 1
Extra 1, direction 2
Extra 2, direction 1
Extra 2, direction 2
E1
E1
E2
E2