19
3
Fuel system
531 00 48-63
531 03 03-98
Remove the pump diaphragm.
Check the diaphragm for damage.
Remove the fuel screen and clean it or
attach a new one.
Remove the bolt holding the cover over
the pump diaphragm.
Lift off the cover (A), the gasket (B) and
the diaphragm (C).
Check the diaphragm for damage to the
valve tongues. If the valve tongues are
bent, the pump will not function in a
satisfactory manner.
Hold it up to a light as well to discover
any holes in the material.
Carefully remove the fuel screen (D),
using a needle for example. Clean or
replace the fuel screen.
NOTE!
During assembly the pump
diaphragm should lie closest
to the carburettor housing.
Remove the movement limiters from
the jet needles using flat nose pliers.
Unscrew the jet needles.
Do not lose the small washers (A)!
NOTE!
Note how the jets are positioned.
(For example, the H-needle is a
little shorter than the L-needle).
Summary of Contents for 326C, 326L, 326LX-Series, 326LDX-Series
