Sonicaid FM800 Encore Series Instructions for Use
47
193B
Displaying the FECG waveform
When FECG is monitored using a scalp electrode, the FM800E monitor shows the fetal
heart rate in the same way as it shows the ultrasound heart rate: as a numerical rate
together with the confidence indicator (the flashing heart symbol). There is also an option
to display the FECG waveform.
The factory default is to display the waveform. So a brand new FM800E will display FECG
waveforms if there is an FECG transducer connected. From then on the FM800E
remembers the on/off setting from the last time it was used.
To switch the display on:
> SETUP.
> NEXT PAGE
> SYSTEM SETTINGS.
> access code (2755).
> AUDIO/GRAPHIC.
> ECG WAVEFORM.
> EXIT > EXIT.
The FECG waveform now appears in place of the baby graphic:
Summary of Contents for Sonicaid FM800 Series
Page 1: ......