Sonicaid FM800 Encore Series Instructions for Use
25
3.2
40B
FM800E main screen
When FM800E is monitoring, fetal parameters are displayed down the left-hand side of
the display, maternal parameters down the right-hand side. Each parameter is always
displayed in the same position on the display. The diagram below shows the zones on the
screen where the different parameters are displayed.
Buttons are not active until a transducer is connected. A triangular pointer indicates that a
button is active.
For example:
Pressing a button brings up a setup screen for that parameter. This setup screen allows
alarms and thresholds to be set.
The setup button in the main screen is for general setup procedures (setting the time and
date, altering the default thresholds, and so on).
154B
Stop beep or make it quieter
FM800E beeps when a button or key is pressed. The loudness of the beep depends on
the loudness of the fetal or maternal alarm, whichever is louder. To make FM800E beep
more quietly or loudly, change the volume of the fetal and/or maternal alarms. See
Section 9.2.
To stop FM800E beeping when a button or key is pressed:
> SETUP > NEXT PAGE > SYSTEM SETTINGS > access code (2755) >
AUDIO/GRAPHIC > KEY PRESS
Summary of Contents for Sonicaid FM800 Series
Page 1: ......