INSTALLATION
12
■
Install the cover with the slot aligned to the socket in the battery wand.
■
Plug the power cable from the shade into the
extension cable.
■
Plug the other end of the extension cable into
the socket in the battery wand.
■
Two-On-One Headrail shades:
Plug both power cables into the extension cables and then
plug both extension cables into the sockets in the battery wands.
If you ordered Magnetic Hold-Down Brackets, proceed to “Attach Magnetic Hold-Down
Brackets (Optional)” on page 14; otherwise proceed to “Testing the Shade” on page 15.
If You Have an 18V DC Power Supply...
Connect the Power Supply
■
Plug the power cable from the shade into
the extension cable.
■
Plug the other end of the extension cable
into the 18V DC power supply.
■
Plug the 18V DC power supply into a
standard outlet.
■
Secure the extension cable using wire
retainers (not supplied). If hiding the cable
behind the shade, make sure it does not
interfere with the operation of the shade.
■
Space the wire retainers approximately
15" apart along the power supply cable,
as shown.
Power Cable
from Shade
Extension
Cable
18V DC
Power
Supply
15"
Maximum
Wire Retainers
Battery Wand Cover
Slot
Socket
Battery Wand Cover
Extension
Cable
Power Cable
from Shade
