INSTALLATION
13
WARNING:
Keep cords and small parts out of the reach of children. They can wrap
cords around their necks and
STRANGLE
.
They can also put small parts in their
mouths and
CHOKE
.
WARNING:
Electric shock and/or a fire hazard may occur if the 18V DC power
supply and cables are not properly installed.
If you ordered Magnetic Hold-Down Brackets, proceed to “Attach Magnetic Hold-Down
Brackets (Optional)” on page 14; otherwise proceed to “Testing the Shade” on page 15.
If You Have an 18V DC Power Supply with Daisy-Chain Connections...
The daisy-chain feature allows up to three PowerView
®
motorized shades to be powered by a
single 18V DC power supply. However, each shade has its own RF receiver and can operate
independently. The daisy-chain feature is only available with the 18V DC power supply option.
■
With two shades, route the power cables from each shade to the “Y” connector, using an
extension cable if necessary.
■
Plug an extension cable into the connector and the 18V DC power supply. A two-shade
configuration is shown below.
■
With three shades, an additional “Y” connector and additional extension cables are used.
Two-On-One Headrail Shades
■
Route the power cables from each side of the shade to the connector. Use extension cables,
if necessary.
■
Plug the extension cables or power cables into the connector and plug the cable into the
18V DC power supply.
If you ordered Magnetic Hold-Down Brackets, proceed to “Attach Magnetic Hold-Down
Brackets (Optional)” on page 14; otherwise proceed to “Testing the Shade” on page 15.
Extension
Cable
“Y” Connector
18V DC Power
Supply
Power
Cables
from
Shades
Extension
Cable
