INSTALLATION
6
■
Pre-drill the screw holes using a
3
/
32
" drill bit.
CAUTION:
Use drywall anchors when mounting into drywall.
■
Attach the installation or extension brackets using the screws provided.
IMPORTANT:
The front edges of the brackets must be level and aligned to each other.
■
When using spacer blocks:
If necessary, first attach the installation bracket to a
1
/
2
"
spacer block as shown on page 3.
➤
Additional
1
/
8
" and
1
/
2
" spacer blocks
may be stacked together up to the
recommended maximum of 1
1
/
2
".
➤
Attach the spacer blocks/installation
brackets to a flat vertical mounting
surface with #6 mounting screws long
enough for a secure installation.
IMPORTANT:
Spacer blocks are
recommended to project the installation
brackets away from the mounting surface for
a
3
/
4
" rear fabric fold clearance. With shades
using a battery wand, a minimum of
3
/
4
"
added clearance is required.
■
If using extension brackets, attach an
installation bracket to the underside of each
extension bracket using the provided screws
and speed nuts.
Proceed to “STEP 2 — Install the Shade” on page 8.
Speed Nut
Screw
Spacer
Blocks
Longer
Screw
