CARE
22
Removing the Shade
■
While holding the headrail, lower the shade
approximately 4" to access the installation
bracket.
■
Step 1:
While holding the headrail, push back
on the bottom tab of the installation bracket
using your thumb or a flat blade screwdriver to
release the bottom edge of the headrail.
■
Step 2:
After releasing the bottom edge, roll
the back of the headrail down and out from the
bracket.
IMPORTANT:
On longer shades, you might
need to lower the shade slightly to access the
locking tab.
Cleaning Procedures
Hunter Douglas Vignette
®
Modern Roman Shades are made with anti-static, dust-resistant
fabrics that repel dirt and dust. For most fabrics, the following cleaning options are available.
Dusting
■
Regular light dusting with a feather duster is all the cleaning needed in most circumstances.
Vacuuming
■
Use a hand-held vacuum with low suction for more thorough dust removal.
Compressed Air/Hair Dryer (Cool Setting)
■
Blow dirt and debris from within the fabric folds using clean, compressed air.
Spot-Cleaning
■
Spot clean using a sponge or delicate cloth, warm distilled water, and a mild soap solution.
Handle with care as you would any fine fabric.
■
Dab the spot with the dampened sponge or cloth until it is removed. Rubbing alcohol or non-
oil-based baby wipes may be used on more stubborn stains. Do not rub the fabric.
■
Allow the shade to dry in the completely lowered position.
Back of
Shade
Push back against
the tab using
your thumb or flat
screwdriver blade.
Roll the headrail
down and out
from the bracket.
Tab
➊
➋
