INSTALLATION
8
STEP 2 — Install the Shade
If You Have a Battery Wand Clip...
■
Attach the battery wand clip to the headrail.
IMPORTANT:
Position the clip so that the battery wand will be between installation brackets.
A minimum of 15" is needed between the brackets to accommodate the battery wand.
➤
Step 1:
Hook the battery wand clip onto the back channel of the headrail.
➤
Step 2:
Rotate the clip down until it snaps into place.
CAUTION:
Be sure the power cable does not become pinched by the brackets or headrail
during installation; damage or overheating of components could result.
CAUTION:
Do not connect the battery wand to the power cable prior to installing the shade.
Front of
Headrail
Battery Wand Clip
1
Hook onto
Back Channel
2
Snap Clip
into Place
