OPERATION
17
Further Operation and Programming Information
PowerView
®
Pebble
®
Remote and/or PowerView Surface Remote Operation
For information regarding operation and programming of the PowerView
®
remote, refer to your
PowerView Motorization Remote Control Guide
or the online PowerView Step-by-step Guide at
hunterdouglas.com/operating-systems/motorized/powerview-motorization/manuals.
PowerView
®
Scene Controller
For information regarding operation and programming of the PowerView
®
Scene Controller, refer
to your
PowerView Motorization Scene Controller Guide
or the online PowerView Step-by-Step
Guide at
hunterdouglas.com/operating-systems/motorized/powerview-motorization/
manuals.
PowerView
®
App Operation
The PowerView
®
Hub is required for PowerView
®
App operation. For information regarding
setup and operation using the PowerView App, refer to the PowerView Step-by-Step Guide at
hunterdouglas.com/operating-systems/motorized/powerview-motorization/manuals.
Resetting the Shade (If Necessary)
Basic Reset
The basic reset is used to reset the shade’s travel limits.
Bottom-Up shades:
1. Press and hold the programming button for approximately 6 seconds. The shade will move
slightly. Release the programming button.
2. The shade will raise to its fully open position to set the upper travel limit, then lower to the
fully closed position to set the lower travel limit. The shade will move slightly one more time to
indicate that the travel limits have been reset.
Top-Down/Bottom-Up shades:
1. Press and hold the programming button for approximately 6 seconds. The shade will move
slightly. Release the programming button.
2. The middle rail will raise to the top, followed by the bottom rail, opening the shade bottom-
up to set the upper travel limits. The bottom rail will then lower, followed by the middle rail,
opening the shade top-down to set the lower travel limits. The shade will move slightly one
more time to indicate that the travel limits have been reset.
