INSTALLATION
4
Mount the Installation Brackets — Inside Mount
■
Mark 2" in from each jamb.
➤
If more than two installation brackets came with your order, space additional bracket(s)
evenly between the two end brackets and mark their location. Mount into wood
whenever possible.
➤
With shades using a battery wand, there must be a minimum of 15½" between brackets
at the motor end.
➤
With shades using two battery wands, there must be a minimum of 18" between
brackets at the motor end.
■
Center the brackets on your marks, then mark each of the screw holes.
➤
For fully recessed and minimum mounting depth based on your order options, see the
illustration on the next page.
Important:
The front edges of the installation brackets must be level and aligned.
■
Drill the screw holes using a
3
/
32
" drill bit.
■
Attach the installation brackets using the screws provided.
➤
Check that the mounting surface is level and the brackets are aligned. If mounting to a
heavily textured surface, shim the brackets, if needed.
Important:
Use drywall anchors when mounting into drywall.
Proceed to “STEP 2 — Install the Shade” on page 7.
2"
2"
Space Evenly
Space Evenly
Jamb
Jamb
Jamb
Motor
End
Jamb
Shades with Attached Battery Wand(s) (Top View)
Space Evenly
2"
2"
Space Evenly
Min. of 15½" for a Battery Wand or
18" for Two Battery Wands
on the Motor End
Summary of Contents for Provenance Woven Wood Shades with PowerView Motorization
Page 1: ...Provenance Woven Wood Shades PowerView Motorization Installation Operation Care ...
Page 25: ...Notes ...
Page 26: ...Notes ...
Page 27: ......
