Hunter Douglas Provenance Woven Wood Shades with PowerView Motorization, Installation Operation And Care

Page: 14 / 28

INSTALLATION
12
■
Plug the power cable from the shade into the
extension cable.
■
Plug the other end of the extension cable
into the socket in the battery wand.
■
Secure the power supply cable using wire
retainers (not supplied). If hiding the cable behind
the shade, make sure it does not impede the operation of the shade.
note: When power is applied to the shade, a green LED inside the manual control button
housing will flash several times to indicate the shade is ready.
Proceed to “Testing the Shade” on page 14.
If You Have a DC Power Supply...
Connect the Power Supply
■
Plug the power cable from the shade into the
extension cable.
■
Plug the other end of the extension cable
into the DC power supply.
■
Plug the DC power supply into a standard
outlet.
note:
When power is applied to the
shade, a green LED inside the manual
control button housing will flash several
times to indicate the shade is ready.
■
Secure the power supply cable using wire
retainers (not supplied). If hiding the cable
behind the shade, make sure it does not
impede the operation of the shade.
■
Space the wire retainers approximately
15" apart along the power supply cable,
as shown.
WarnIng:
Keep cables and small parts out of the reach of children. They can wrap
cables around their necks and STRANGLE . They can also put small parts in their
mouths and
CHOKE
.
WarnIng:
Electric shock and/or a fire hazard may occur, if not properly installed.
Proceed to “Testing the Shade” on page 14.
Battery Wand Cover
Extension
Cable
Power Cable
from Shade
Power Cable
from Shading
Extension
Cable
DC
Power
Supply
15"
Maximum
Wire Retainers