INSTALLATION
9
If You Ordered Hold-Down Brackets...
Hold-down brackets provide stability and prevent swaying by securing
the bottom rail — for example, in French door applications. Hold-down
brackets can only be used with outside mount shades.
■
Lower the shade and place the pins from the hold-
down brackets into the bottom rail end caps.
■
On the mounting surface, mark the screw holes.
■
Drill the screw holes using a
3
/
32
" drill bit.
■
Attach the hold-down brackets to the mounting
surface using the screws provided.
STEP 3 — Connect the Power Source
■
Shades with PowerView
™
face shade and PowerView Independent Operable Liner.
Depending on the size of your shade, you will receive two extension cables and a connector
or two battery wands. One power cable from your shade will plug into the connector. The
other power cable from your shade will plug into the extension cable and then into your
power source.
■
Refer to the appropriate page based on your order.
➤
For a battery wand, see “If You Have a Battery Wand...” on page 10.
➤
For an optional DC power supply, see “If You Have a DC Power Supply...” on page 12.
➤
For two battery wands and Y-connector, see “If You Have a Y-Connector for Adapting Two
Battery Wands....” on page 13.
➤
For an optional DC power supply with daisy-chain connections, see “If You Have a DC
Power Supply with Daisy-Chain Connections...” on page 13.
Power Cable
from Shade
Extension
Cable
Power Cable
from Shade
Connector
Extension
Cable
Power
Source
Summary of Contents for Provenance Woven Wood Shades with PowerView Motorization
Page 1: ...Provenance Woven Wood Shades PowerView Motorization Installation Operation Care ...
Page 25: ...Notes ...
Page 26: ...Notes ...
Page 27: ......
