Hunter Douglas Provenance Woven Wood Shades with PowerView Motorization, Installation Operation And Care

Page: 21 / 28

CARE
19
Removing the Shade (If Necessary)
If you have the Crestover
™
valance, remove the Crestover
valance (see below) before removing the shade.
■
Raise the shade completely.
■
Support the headrail so that it does not fall. Push up
on the headrail and use your finger or a flat blade
screwdriver to release the bottom tab on the
installation brackets.
■
Pull the headrail straight out from the installation
brackets.
Removing the Crestover™ Valance (If Necessary)
■
Push the white tab at the
bottom of the valance bracket
to release. Rotate the bottom
of the valance away from the
shade and remove.
Release Using
Finger or
Flat Blade
Screwdriver
Push up on
the Headrail
Push tab to
release