Hunter Douglas Provenance Woven Wood Shades with PowerView Motorization, Installation Operation And Care

Page: 18 / 28

OPERATION
16
Top-Down/Bottom-Up Operation
1. Press
▼
CLOSE to lower the bottom rail, closing the shade.
2. Press the left arrow to lower the middle rail. This opens the shade top-down on a Top-
Down/Bottom-Up shade. (If the bottom rail is not fully lowered, pressing this button will lower
the bottom rail first then lower the middle rail.)
3. Press the right arrow to raise the middle rail. This closes the shade bottom-up on a
Top-Down/Bottom-Up shade.
4. Press
▲
OPEN to raise the bottom rail, opening the shade bottom-up. (If the middle rail is not
fully raised, pressing this button will raise the middle rail first then raise the middle rail.)
5. Press
■
STOP to stop shade movement anywhere along the shade’s travel.
Further Operation and Programming Information
PowerView
™
Pebble
™
Remote and/or PowerView Surface Remote Operation
For information regarding operation and programming of the PowerView remote, refer to your
PowerView Motorization Remote Control Guide .
PowerView Scene Controller
For information regarding operation and programming of the PowerView Scene Controller, refer
to your
PowerView Motorization Scene Controller Guide .
PowerView App Operation
PowerView Hub is required for PowerView App operation. For information regarding setup
and operation using the PowerView App, refer to the online
PowerView App Software Guide at
hunterdouglas.com/powerview/support
.
Resetting the Shade (If Necessary)
If you need to reset a shade’s travel limits:
Basic Reset
The basic reset is used to reset the shade’s travel limits. This procedure will also reset the
♥
FAVORITE position to its default (shade closed halfway).
Bottom-Up shades:
1. Press and hold the manual control button for 6 seconds. The shade will move slightly.
2. Release the manual control button. The shade will raise to its fully open position to set the
upper travel limit, then lower to the fully closed position to set the lower travel limit. The shade
will move slightly one more time to indicate that the travel limits have been reset.