Humminbird 768 combo Operation Manual Download Page 70

Page: 70 / 194

VIEW Key

The VIEW key is used to cycle through all available views. Press the
VIEW key to advance to the next view. Repeatedly pressing VIEW

cycles through all views available. Views can be hidden to optimize the system to
your fishing requirements (see

Views

Views Menu Tab

NOTE:

Press the EXIT key to cycle through the views in reverse order.

INFO Key

Info -

Press the INFO key while in Bird's Eye, Chart, or Combo View

to display information about objects that are near an active cursor.

If the cursor is not active, the Chart Info submenu
will be displayed. Press the DOWN Cursor key to
select Nearest Port, Nearest Tide Station, or
Nearest Current Station. Then press the RIGHT
Cursor key to display the requested information.

NOTE:

The built-in UniMap™ does not contain Port,

Tide, or Current information. This information is only
available from optional purchase MMC/SD cards.

Key Functions

Summary of Contents for 768 combo



































































































































































































Search results

Summary of Contents for 768 combo

Reviews:

Related manuals for 768 combo

Brands by name

Popular brands

Humminbird 768 combo, Operation Manual

Search results

Summary of Contents for 768 combo

Reviews:

Related manuals for 768 combo

Brands by name

Popular brands