Humminbird 768 combo Operation Manual Download Page 108

Page: 108 / 194

Cancel MOB Navigation

(only when MOB Navigation is activated)

Cancel MOB Navigation

removes the Man Overboard (MOB) waypoint and

exits Man Overboard mode. This menu option will only appear when you are
currently navigating in Man Overboard mode.

To Cancel MOB Navigation:

1. Highlight Cancel MOB Navigation on the Navigation X-Press™ Menu.

2. Press the RIGHT Cursor key to initiate canceling MOB navigation.

3. The Confirm dialog box will appear. To cancel MOB navigation, press

the RIGHT Cursor key once more. To avoid canceling MOB navigation,
press the LEFT Cursor key.

Remove Target

(only if a Target is Active)

Remove Target

removes the waypoint target from the display. This menu option

will only appear when a target has already been applied to a waypoint.

NOTE:

See

Introduction to Navigation: Add a Waypoint Target or Trolling Grid

for

more information.

To Remove a Target:

1. Highlight Remove Target on the Navigation X-Press™ Menu.

2. Press the RIGHT Cursor key to remove the target.

Navigation X-Press™ Menu

Summary of Contents for 768 combo



































































































































































































Search results

Summary of Contents for 768 combo

Reviews:

Related manuals for 768 combo

Brands by name

Popular brands

Humminbird 768 combo, Operation Manual

Search results

Summary of Contents for 768 combo

Reviews:

Related manuals for 768 combo

Brands by name

Popular brands