manualshive.com logo in svg

Humminbird 768 combo, Operation Manual

The Humminbird 768 combo is an exceptional fish finder and GPS unit designed for avid anglers. This innovative device comes with a comprehensive Operation Manual, available for free download from our website, providing users with detailed instructions, tips, and insights on maximizing their fishing experience.

Share
Download
background image

108

Low Battery Alarm

Low  Battery  Alarm

sounds  when  the  input

battery voltage is equal to or less than the menu setting. The battery alarm will
only  sound  for  the  battery  that  is  connected  to  the  Fishing  System.  The  Low
Battery Alarm should be set to warn you when the battery voltage drops below
the safety margin that you have determined. 

To change the Low Battery Alarm setting:

1. Highlight Low Battery Alarm on the Alarms main menu.

2. Press the LEFT or RIGHT Cursor keys to change the Low Battery Alarm

setting. (Off, 8.5V - 13.5V, Default = Off)

Aux. Temp. Alarm 

(with optional-purchase temp. probe or Temp/Speed only)

Aux.  Temp.  Alarm

sounds  when  the  water  temperature  from  the

Paddlewheel/Temperature  Probe  detected  by  the  Fishing  System  reaches  the
Aux. Temp. Alarm setting, which is either set in degrees Fahrenheit or Celsius

[International Models only]

. 

To change the Aux. Temp. Alarm setting:

1. Highlight Aux. Temp. Alarm on the Alarms main menu.

2. Press  the  LEFT  or  RIGHT  Cursor  keys  to  change  the  Aux.  Temp.  Alarm

setting. (Off, 33-120 [Fahrenheit], 0-50 [Celsius], Default =  Off)

For example, if the Aux. Temp. Alarm is set to 58 degrees Fahrenheit, and the

water temperature falls from 60 degrees to 58 degrees, the Aux. Temp. Alarm
will  sound.  Similarly,  if  the  water  temperature  rises  from  56  degrees  to  58
degrees, the Aux. Temp. Alarm will also sound.

For instance, if you are running a trolling motor (battery operated), you would

want to set the Low Battery Alarm to sound before the battery voltage drops
too low for it to be used to start your main, gasoline-powered engine.

Alarms Menu Tab

Summary of Contents for 768 combo



































































































































































































Reviews:

No comments

Related manuals for 768 combo

Lowrance HDS-5x Quick Start Manual preview
HDS-5x
Brand: Lowrance Pages: 4
Garmin GWS 10 Marine Wind Sensor Important Safety Information preview
GWS 10 Marine Wind Sensor
Brand: Garmin Pages: 48
Humminbird 898 c SI Quick Operation Manual preview
898 c SI
Brand: Humminbird Pages: 2
Humminbird AS RSL Operation Manual preview
AS RSL
Brand: Humminbird Pages: 13
Humminbird 778c HD XD Operation Manual preview
778c HD XD
Brand: Humminbird Pages: 107
Humminbird ICE Flasher 55 Installation And Operation Manual preview
ICE Flasher 55
Brand: Humminbird Pages: 44
Humminbird 778C Operation Manual preview
778C
Brand: Humminbird Pages: 110
Humminbird Matrix 10 Operation Manual preview
Matrix 10
Brand: Humminbird Pages: 60
Humminbird 947C Installating And Operation Manual preview
947C
Brand: Humminbird Pages: 91
Humminbird 788c Operation Manual preview
788c
Brand: Humminbird Pages: 193
Humminbird 788ci HD DI Operation Manual preview
788ci HD DI
Brand: Humminbird Pages: 202
Humminbird 967C Installation And Operation Manual preview
967C
Brand: Humminbird Pages: 143
Humminbird 917C Installation And Operation Manual preview
917C
Brand: Humminbird Pages: 141
Humminbird 997c SI Combo Installation And Operation Manual preview
997c SI Combo
Brand: Humminbird Pages: 151
Humminbird 858 HD DI Operation Manual preview
858 HD DI
Brand: Humminbird Pages: 142
Humminbird 858c Combo Installation And Operation Manual preview
858c Combo
Brand: Humminbird Pages: 160
Humminbird 798ci HD SI Combo Operation Manual preview
798ci HD SI Combo
Brand: Humminbird Pages: 200

Brands by name

Popular brands

Load more brands