Humminbird 768 combo Operation Manual Download

Page: 104 / 194

Waypoint [Name]

(Only with an active cursor on a waypoint)

Waypoint [Name]

allows you to view the Waypoints submenu for the waypoint

under your cursor.

To view the Waypoint [Name] Submenu:

1. Use the 4-WAY Cursor Control key to move the cursor onto an existing

waypoint and press the MENU key once, or use

Cursor to Waypoint

select a waypoint from the saved waypoints list.

2. Highlight

Waypoint [Name]

on the Navigation

X-Press™

Menu.

3. Press the RIGHT Cursor key to view the Waypoints submenu.

NOTE:

See

Navigation Menu Tab

for more Waypoints information.

The Waypoint Submenu contains the following menu options:

Edit

allows you to edit the Name, Position (Latitude and Longitude), and select

the Icon that will be used to represent the waypoint in the Chart and Combo
Views.

Delete

allows you to delete a waypoint from the saved waypoints list.

Target

allows you to apply a target to a waypoint selected from the saved

waypoints list.

Grid

allows you to apply a trolling grid to a waypoint selected from the saved

waypoints list.

Waypoint Submenu

Navigation X-Press™ Menu

Summary of Contents for 768 combo



































































































































































































Search results

Summary of Contents for 768 combo

Reviews:

Related manuals for 768 combo

Brands by name

Popular brands

Humminbird 768 combo, Operation Manual

Search results

Summary of Contents for 768 combo

Reviews:

Related manuals for 768 combo

Brands by name

Popular brands