Humminbird 768 combo Operation Manual Download Page 119

Page: 119 / 194

107

Depth Alarm

sounds when the depth becomes

equal to or less than the menu setting.

To change the Depth Alarm setting:

1. Highlight Depth Alarm on the Alarms main menu.

2. Press the LEFT or RIGHT Cursor keys to change the Depth Alarm

setting. (OFF, 1 to 100 feet, or 0.5 to 30 meters

[International Models

only]

, Default = OFF)

Fish ID Alarm

sounds when the Fishing System

detects fish that correspond to the alarm setting. Fish ID Alarm will only
sound if Fish ID+™ is on.

To change the Fish ID Alarm setting:

1. Highlight Fish ID Alarm on the Alarms main menu.

2. Press the LEFT or RIGHT Cursor keys to change the Fish ID Alarm

setting. (Off, All, Large/Medium, Large, Default = Off)

Large

Large/Medium

All

Off

For example, if you've set the Fish ID Alarm to sound for Large fish only, the

Fish ID alarm will sound when a large-sized fish is detected.

Alarms Menu Tab

Summary of Contents for 768 combo



































































































































































































Search results

Summary of Contents for 768 combo

Reviews:

Related manuals for 768 combo

Brands by name

Popular brands

Humminbird 768 combo, Operation Manual

Search results

Summary of Contents for 768 combo

Reviews:

Related manuals for 768 combo

Brands by name

Popular brands