Humminbird 768 combo Operation Manual Download Page 106

Page: 106 / 194

Clear Current Track

allows you to clear the

current track being displayed and start a new track at the present position.

To Clear Current Track:

1. Highlight Clear Current Track on the Navigation X-Press™ Menu.

2. Press the RIGHT Cursor key to initiate clearing the current track.

3. The Confirm dialog box will appear. To clear the current track, press the

RIGHT Cursor key once more. To cancel clearing the current track, press
the LEFT Cursor key.

Save Current Route

(only when Navigating)

Save Current Route

allows you to save the current route being displayed. This

menu option will only appear when you are currently navigating a route.

To Save Current Route:

1. Highlight Save Current Route on the Navigation X-Press™ Menu.

2. Press the RIGHT Cursor key to initiate saving the current route.

3. The Confirm dialog box will appear. To save the current route, press the

RIGHT Cursor key once more. To cancel saving the current route, press
the LEFT Cursor key.

Navigation X-Press™ Menu

Summary of Contents for 768 combo



































































































































































































Search results

Summary of Contents for 768 combo

Reviews:

Related manuals for 768 combo

Brands by name

Popular brands

Humminbird 768 combo, Operation Manual

Search results

Summary of Contents for 768 combo

Reviews:

Related manuals for 768 combo

Brands by name

Popular brands