Humminbird 768 combo Operation Manual Download Page 149

Page: 149 / 194

137

Chart Detail Level

allows you to select how much

chart detail you want displayed on the Navigation Views.

•

Basic

shows land areas, ports, obstructions and restricted areas.

•

Navigation

shows navaids, landmarks, ferryways and navigation routes

in addition to the Basic information.

•

Underwater

shows depth contours, fishing areas, underwater wrecks,

tides and currents in addition to the Basic and Navigation information.

•

All

shows roads, buildings, railways, and other notations in addition to

the Basic, Navigation, and Underwater information.

To change the Chart Detail Level setting:

1. Highlight Chart Detail Level on the Chart main menu.

2. Press the LEFT or RIGHT Cursor keys to change the Chart Detail Level

setting. (Basic, Navigation, Underwater, All, Default = All)

NOTE:

Some chart details are only available with optional-purchase MMC/SD cards.

Chart Menu Tab

Summary of Contents for 768 combo



































































































































































































Search results

Summary of Contents for 768 combo

Reviews:

Related manuals for 768 combo

Brands by name

Popular brands

Humminbird 768 combo, Operation Manual

Search results

Summary of Contents for 768 combo

Reviews:

Related manuals for 768 combo

Brands by name

Popular brands