Humminbird 768 combo Operation Manual Download Page 157

Page: 157 / 194

145

Triplog Reset

resets the Triplog to zero, and will

appear in the menu if a Temp/Speed Accessory is

connected and the paddlewheel has moved at least once, or if the GPS Receiver
is connected.

The Triplog provides the following information: timer for elapsed time, distance
traveled since last reset, and average speed.

NOTE:

See

Setup Menu Tab: Select Readouts (Advanced)

to find out how to display

Triplog information on the screen.

To Reset Triplog:

1. Highlight Reset Triplog on the Setup main menu.

2. Press the RIGHT Cursor key to initiate Triplog Reset.

3. The Confirm dialog box will appear. To reset the Triplog, press the

RIGHT Cursor key once more. To cancel Reset Triplog, press the LEFT
Cursor key.

Restore Defaults

resets ALL menu settings to their

factory defaults.

Use this menu choice with caution!

To Restore Defaults:

1. Highlight Restore Defaults on the Setup main menu.

2. Press the RIGHT Cursor key to initiate restoring defaults.

3. The Confirm dialog box will appear. To reset the defaults, press the

RIGHT Cursor key once more. To cancel Restore Defaults, press the
LEFT Cursor key.

Setup Menu Tab

Summary of Contents for 768 combo



































































































































































































Search results

Summary of Contents for 768 combo

Reviews:

Related manuals for 768 combo

Brands by name

Popular brands

Humminbird 768 combo, Operation Manual

Search results

Summary of Contents for 768 combo

Reviews:

Related manuals for 768 combo

Brands by name

Popular brands