HUAWEI VP9660
Quick Start Guide
1 Safety Precautions
Issue 04 (2013-12-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2
Do not place the device on or near flammable materials such as foam.
Operating Precautions
Do not allow children to play with the device or its accessories. Swallowing the
accessories may be fatal.
Use only the provided accessories, such as the power adapter, or those recommended by
the manufacturer.
Make sure that the device does not get wet. If liquid gets into the device, disconnect the
power supply immediately and unplug all the cables connected to the device, such as the
power cable. After ensuring power is completely cut off from the device, contact an
authorized maintenance center.
The power supply of the device must meet the input voltage specifications of the device.
Use the surge protector provided with the device.
Before plugging or unplugging any cables, shut down the device and disconnect the
power supply.
While plugging or unplugging any cables, make sure that your hands are dry.
Do not step on, pull, or stretch any cables as doing so may damage the cables or cause
the device to malfunction
Do not use old or damaged cables.
Keep the power plug clean and dry to prevent electric shocks or other dangers.
During a thunderstorm, disconnect the device from the power supply and unplug all the
cables connected to the device.
If the device will not be used for long periods of time, power off the device, disconnect
the power supply, and unplug all the cables connected to the device.
Do not look into the infrared transmitting interface on the remote control without eye
protection.
If smoke, noise, or odor is emitted from the device, stop using and power off the device
immediately, disconnect the power supply, and unplug all the cables. Contact the
authorized maintenance center for repair.
Make sure that no object (such as metal shavings) enters the device through the heat
dissipation vent.
Before connecting any other cables to the device, connect the ground cable of the device.
Before disconnecting the ground cable from the device, disconnect all other cables.
Make sure that the three-phase power socket is grounded properly. The neutral line and
the live line cannot be connected inversely.
Do not scratch or otherwise damage the device shell. Flaking or peeling of the paint may
lead to skin allergy or malfunction of the device. If paint flakes and peels drops into the
host, a short circuit may occur.
If the device's fuse burns out, replace it with a fuse of the same model and specifications.
Cleaning Precautions
Before cleaning the device, power it off, disconnect the power supply, and unplug all the
cables connected to the device.
Do not clean the device shell with any cleaning solution or cleanser spray. Use a piece of
soft cloth to gently wipe down the device shell if dusty or smudged.
