background image

170W AC Power Module

The 170W AC power module converts AC power to DC power for the device. 

Figure 2-64

illustrates the appearance of the AC power module.

Figure 2-64

 Appearance of the 170W AC power module

INPUT

OUTPUT

ON

OFF

~100-240V

;50/60Hz;2.5A

Power switch Power receptacle

Clip hole

Power indicators

INPUT OUTPUT

ON

OFF

~100-240V;50/60Hz;2.5A

Name

Description

INPUT (green)

l

Steady on: The input of the AC power module is normal.

l

Off: The input of the AC power module is abnormal.

OUTPUT (green)

l

Steady on: The output of the AC power module is normal.

l

Off: The output of the AC power module is abnormal or in
protection state (except hiccup mode protection state, in
which the indicator blinks).

Power switch

The power switch allows you to turn on or off the power
output.

Power receptacle

Connects the C13 plug of the AC power cable.

Clip hole

The hole is used to install the power cable clip, which is used
to bind and fix the power cable. The power cable clip is
installed before shipment.

 

HUAWEI USG6000 Series
Hardware Guide

2 Hardware Overview

Issue 08 (2017-06-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

134

Summary of Contents for USG6000 Series
































































































































































































































































































































































































































Reviews: