Huawei SUN2000-33KTL-A User Manual Download Page 92

Page: 92 / 117

SUN2000-(33KTL-A, 36KTL, 42KTL)
User Manual

7 Man-Machine Interactions

Issue 07 (2018-05-04)

Huawei Proprietary and Confidential

7.1.4 Upgrading

Context

Upgrade delay

is mainly used in the upgrade scenarios where the PV power supply is

disconnected at night due to no light or unstable at dawn or dusk due to poor sunlight.

After the SUN2000 upgrade starts, if

Upgrade delay

is set to

Enable

, the upgrade package is

loaded first. After the PV power supply recovers and the activation conditions are met, the
SUN2000 automatically activates the upgrade.

Upgrade delay

is set to

Enable

by default, which means that the upgrade can take place at day or night.

After enabling

Upgrade delay

, start the SUN2000 upgrade over a USB flash drive, SmartLogger, or

NMS. The SUN2000 upgrade process contains the following two stages:

The monitoring component caches and loads the upgrade package.

Upgrade package activation starts when the following conditions are met.

Table 7-4

Conditions for starting delayed activation

Upgrade Method

Activation Start Condition

Local upgrade over a USB
flash drive



The CAN communication is normal.



The PV power supply is normal.

The activation starts when either of the preceding two
conditions is met.

Local upgrade of the SUN2000
APP

Remote upgrade over the
SmartLogger



The PV input voltage is greater than 500 V.



The output power is greater than 1 kW.

The activation starts when either of the preceding two
conditions is met.

Remote upgrade over the NMS

When upgrading the SUN2000 remotely, do not perform local operations for the SUN2000.

Procedure

Step 1

Obtain the required upgrade package from Huawei technical support website (for example,
SUN2000 V200R002C00SPC

XXX

Step 2

Decompress the upgrade package.

After obtaining the upgrade package

SUN2000V200R002C00SPCXXX_package.zip

decompress the package and ensure that the extracted files include:



config.txt



config_arm9.txt



sun_lmt_mgr_cmd.emap (This is a boot script file.)



SUN2000.bin



SUN2000_CPLD.bin



SUN2000_FE.bin

Summary of Contents for SUN2000-33KTL-A






















































































































Search results

Summary of Contents for SUN2000-33KTL-A

Reviews:

Huawei SUN2000-33KTL-A, User Manual, Page: 92 / 117

Search results

Summary of Contents for SUN2000-33KTL-A

Reviews: