Installation Manual
Quidway S3026C-PWR Ethernet Switch
Chapter 5 Loading BOOTROM and Host Software
Huawei Technologies Proprietary
5-2
************************************************
* *
* Quidway S3026C-PWR BOOTROM, Version 100 *
* *
************************************************
Copyright(C) 2003-2004 by HUAWEI TECHNOLOGIES CO.,LTD.
Creation Date : Mar 1 2004, 12:00:00
CPU Type : MIPS
CPU Clock Speed : 150MHz
Memory Size : 64MB
Initialize S3026C-PWR mainboard..............................OK!
Initialize POE module....................................OK!
SDRAM selftest...........................................OK!
FLASH selftest…..........................................OK!
CPLD selftest............................................OK!
Port g1/1 has 1000BASE-SX MM module
Port g2/1 has 1000BASE-T GT module
Switch chip selftest.....................................OK!
Switch SDRAM selftest....................................OK!
PHY selftest.............................................OK!
Please check port leds...................................OK!
The switch Mac is: 00-E0-FC-35-26-E0
Press Ctrl-B to enter Boot Menu... 5
Press <Ctrl+B>, and the system will prompt:
Password :
Note:
To access the Boot menu, press <Ctrl+B> within 5 seconds after the screen prompts "Press Ctrl-B to
enter Boot Menu...”, otherwise, the system will enter the program decompress process. If you still want
to enter the Boot menu after the decompression process has started, you must reboot the switch.
After you type correct Boot ROM password (no password is set by default), the
system enters the Boot menu.
