Installation Manual
Quidway S3026C-PWR Ethernet Switch
Chapter 3 Installation
Figure 3-1
Mounting the switch on a 19-inch rack
Note:
The mounting ears are used for fixing rather than bearing. When the switch is mounted on a 19-inch
standard rack, it should be borne by slide rails (fixed on the rack).
3.1.2 Freestanding the Switch on a Tabletop
If there is no 19-inch standard rack, you may have to place the switch on a clean
tabletop, which is a relatively easy way to operate. The user needs only pay
attention to the following during such operation:
z
Make sure that the table is stable and well grounded.
z
Leave about 10 centimeters of space around the switch for heat dissipation.
z
Do not place heavy objects on the top of the switch.
Huawei Technologies Proprietary
3-2
