Installation Manual
Quidway S3026C-PWR Ethernet Switch
Chapter 4 Initial Power On
Huawei Technologies Proprietary
4-5
Figure 4-6
Setting terminal emulation in properties setting window
4.4 Booting Switch
4.4.1 Checking before Powering on Switch
Before powering on a switch, check whether:
z
The power cord and ground wire are correctly connected.
z
The voltage matches the requirement for the switch.
z
The Console cable is correctly connected the terminal (which can be a PC) for
configuration has been started, and the configuration parameters have been
set.
4.4.2 Powering On Switch
After powering on the switch, run Boot ROM program first and the following
information will be displayed:
Starting...
************************************************
* *
