Installation Manual
Quidway S3026C-PWR Ethernet Switch
Chapter 4 Initial Power On
Huawei Technologies Proprietary
4-1
Chapter 4 Initial Power On
4.1 Setting up Configuration Environment
Refer to the following figure to set up the configuration environment:
z
Terminal (e.g., a PC) is connected to the Console port of the switch using a
Console cable.
PC
Console cable
Switch
Connnecting
Console port
Connecting
serial port
Figure 4-1
Configuration networking when powering on the switch for the first time
4.2 Connecting the Console Cable
Step 1: Plug the DB-9 female connector of Console cable to the serial port of the PC
where the switch is to be configured.
Step 2: Connect the RJ-45 connector of Console cable to the Console port of the
switch.
4.3 Setting Terminal Parameters
Step 1: Start the PC and run the terminal emulation program such as the Terminal of
Windows3.1 or the HyperTerminal of Windows95/98/NT.
Step 2: Set terminal parameters (For example, set the HyperTerminal parameters in
Windows98).
