Pass the hose clamps through the pole mounting bracket and fix the hose clamps on a pole using
the screws of the hose clamps.
Fasten the OAU 2A box, which has a conversion bracket, on the
pole mounting bracket using screws. Then, turn the box gently (in
both the horizontal and vertical directions) to check whether the box
is securely installed.
Huawei has installed a conversion bracket
on each OAU 2A before shipping it.
Press the pole mounting bracket against a wall, level the installation location using
a level, and mark locating points using a marker.
Pole mounting bracket
Drill holes and install expansion bolts in the locating points.
Ensure that each expansion bolt
protrudes from the wall for 8 mm to
12 mm.
Install the pole mounting bracket onto the expansion bolts, place a flat
washer, a spring washer, and a nut on each expansion bolt, and then
tighten the nuts.
Locating point
Fasten the OAU 2A box, which has a conversion bracket, on the
pole mounting bracket using screws. Then, turn the box gently
(in both the horizontal and vertical directions) to check whether
the box is securely installed.
1.
M6x60 bolt
2.
Nut
3.
Spring washer
4.
Flat washer
5.
Expansion sleeve
Fasten the extra portion of the hose clamps onto
the pole using outdoor binding straps.
Huawei has installed a
conversion bracket on each
OAU 2A before shipping it.
1
2
3
1
2
3
4
13
Installation Reference
Optional: Installing an OAU 2A on a Pole
Optional: Installing an OAU 2A on a Wall
