Huawei LUNA2000-30-S0 User Manual Download Page 27

Page: 27 / 129

Intelligent O&M

●

The factory defaults meet the requirements of target markets and the battery

can be started by pressing only one button and supports black startup.

●

The LED indicator shows the status. You can also use the mobile phone app to

perform local and remote operations.

●

The cloud data management system is used to manage the battery anytime

and anywhere.

Low Investment

●

Only common installation tools are required.

●

The battery features high efficiency and power density, which saves

installation space.

●

The battery features easy O&M.

2.5 Working Mode

The LUNA2000 converts HVDC generated by PV strings into low-voltage direct

current (LVDC) through DC-to-DC conversion and stores the power in batteries. It

can also convert LVDC into HVDC and then into AC power through the inverter.

Working Mode

The LUNA2000 battery can work in hibernation, standby, or operating mode.

Table 2-5 Working mode

Working

Mode

Description

Hibernation

mode

The internal auxiliary power source and DC-DC converter of the

battery do not work.

Standby

mode

The auxiliary power source inside the battery works, and the

DC-DC converter does not work.

Operating

mode

The internal auxiliary power source of the battery works, and

the DC-DC converter charges or discharges.

LUNA2000-(5-30)-S0

User Manual

2 Product Introduction

Issue 07 (2022-01-10)

Summary of Contents for LUNA2000-30-S0


































































































































Search results

Summary of Contents for LUNA2000-30-S0

Reviews:

Related manuals for LUNA2000-30-S0

Brands by name

Popular brands

Huawei LUNA2000-30-S0, User Manual

Search results

Summary of Contents for LUNA2000-30-S0

Reviews:

Related manuals for LUNA2000-30-S0

Brands by name

Popular brands