Huawei IP Phone eSpace
7810&7820&7830&7850&7870&7803X
Administrator Guide
2 Single IP Phone Configuration
Issue 01 (2011-12-31)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
18
Table 2-6
PC port parameters
Parameter
Description
As Bridge
If you select
As Bridge
, the PC port functions as a bridge.
As Router
If you select
As Router
, eSpace 7850 functions as a router.
-IP Address
IP address of an IP phone when it functions as a router.
-Subnet Mask
Subnet mask for the IP address of an IP phone when it
functions as a router.
-Enable DHCP Server
Indicates whether to enable the DHCP function for eSpace
7850.
-Start IP Address
Start IP address assigned to the device connected to the PC
port when the DHCP function is enabled for eSpace 7850.
-End IP Address
End IP address assigned to the device connected to the PC
port when the DHCP function is enabled for eSpace 7850.
2.3.3 Enabling the VLAN Function
Function Description
A VLAN is a group of hosts with a common set of requirements that communicate as if they
were attached to the same broadcast domain, regardless of their physical location. VLANs are
mainly configured on switches and routes. Broadcast traffic and unicast traffic on a VLAN
cannot be forwarded to other VLANs, which controls traffic, simplifies network management,
and reduces broadcasts.
If the VLAN function is enabled on an IP phone, the IP phone can communicate only with
computers on the same VLAN.
Phone Configuration
Set VLAN parameters in the
Advanced
area on the
Network
tab page, as shown in
Figure
2-8
.