Huawei 7810 Administrator'S Manual Download Page 109

Page: 109 / 191

Huawei IP Phone eSpace
7810&7820&7830&7850&7870&7803X
Administrator Guide

4 Troubleshooting

Issue 01 (2011-12-31)

Huawei Proprietary and Confidential

103

4.1.4 Icons

Table 4-2

lists icons that may occur on the eSpace 7850&7830&7810 screen.

Table 4-2

Icons on the eSpace 7850&7830&7820&7810 screen

No.

Icon

Description

This icon blinks when network connection failed.

Indicates that an account failed to be registered.

Indicates that an account is being registered.

Indicates that an account is registered successfully.

Indicates a missed call.

Indicates an incoming call.

Indicates an outgoing call.

Indicates all input methods.

To switch input methods, press the key corresponding to this
icon.

Indicates digital input.

Indicates lower-case input.

Indicates upper-case input.

Indicates that a call is muted.

Indicates that a call is held.

Indicates a voice message.

Indicates that the call forward function is enabled.

Indicates that the DND function is enabled.

Indicates that the auto answer function is enabled.

Indicates the handset mode.

Indicates the headset mode.

Indicates the handsfree mode.

Table 4-3

lists icons that may occur on the eSpace 7870 screen.

Summary of Contents for 7810
































































































































































































Search results

Summary of Contents for 7810

Reviews:

Related manuals for 7810

Brands by name

Popular brands

Huawei 7810, Administrator'S Manual

Search results

Summary of Contents for 7810

Reviews:

Related manuals for 7810

Brands by name

Popular brands