108 Getting Connected
Next
time you use your device to detect wireless networks, you
will not see the pop-up message windows again, and you will not
be prompted to enter the network key of the previously accessed
wireless network (unless you perform a hard reset which will erase
custom settings on your device).
Note
Wi-Fi networks are self-discoverable, which means no additional steps are
required for your device to connect to a Wi-Fi network. It may be necessary
to provide a username and password for certain closed wireless networks,
however.
To save battery power while connected to a wireless network
1.
Tap
Start > Settings > Connections
tab >
Wireless LAN
to open the
Wireless LAN Settings screen.
2.
On the
Power Mode
tab of the Wireless LAN Settings screen,
move the
Power Save Mode
slider to a position that optimizes
performance with the least power consumption.
For example, move the slider to the
left (Best Performance) to have the
optimal WLAN performance; move to
the right (Best Battery) to obtain the
maximum battery usage.
To check the wireless LAN status
You can check the current wireless connection status from the following
three screens of your device:
•
Title bar
. When you enable Wi-Fi on your device, the Wi-Fi ON icon
( ) will appear on the title bar of the Today screen.
After Wi-Fi is turned on, your device scans for available wireless
Summary of Contents for HERA100
