HTC EXCA100, User Manual

Page: 88 / 172

88 Getting Connected
3.
Select the
Authentication
type and
Data encryption
then click
Next . For WPA authentication or TKP, AES, or WEP data encryption,
enter the needed information in the remaining fi elds.
4.
Select
Use IEEE 802.1x network access control
to use Extensible
Authentication Protocol (EAP). Select the EAP type depending on the
type of authentication. Click
Finish
.
To increase security on the Wi-Fi network
The LEAP (Lightweight Extensible Authentication Protocol) feature of
Comm Manager helps increase security on your phone, and ensures that
nobody is able to access your network without your permission.
1.
On the WLAN Settings screen, select
LEAP
.
2.
Click
Menu > New
.
Note
By default, the LEAP screen displays data that you entered previously.
However, you can modify or delete the data as required by clicking
Menu >
Modify
or
Menu > Delete
on the LEAP screen.
3.
Enter the
SSID
(Service Set Identifi er).
You can obtain this information from your wireless service provider.
4.
Enter the user name, password, and domain.
5.
Select an
Authentication Type
.
By default, the
Authentication Type
for your phone is
Open
System
authentication.
Note
For LEAP to work correctly, the receiving phone (your phone) must be set
with the same SSID, user name, and password as the access point.