FULLTEST
3
EN - 76
Figure 72: ADD CUSTOMER menu
5) Scan the customer label by using an USB barcode reader, customer name will be entered and
display will return to SAVE menu, see the figure xx.
6) Modify or enter the other two save levels (LOCATION and MACHINE) as well as COMMENT
manually if needed, then confirm save operation by pressing the SAVE hard key again.
Instruction how to configure the Barcode reader Honeywell type
Voyager 1250G-2USB-1
Before first using the above mentioned barcode reader it is required to configure it as follows:
-
Connect the barcode reader to FULLTEST 3 (or to PC) and switch on the FULLTEST 3 (or PC) in
order to assure proper power supply.
-
Do the start configuration of the barcode reader by scanning the code below.
-
Set the prefix of the barcode reader by scanning the code below.
-
Set the suffix of the barcode reader by scanning the code below.
-
Finish the configuration of the barcode reader by scanning the code below.