8
WFS 1545 Operations Manual
b.
UNCRATING
NOTE
:
Inspect “Tip and Tell” and shock indicators mounted on the outside of the crates for indication of
mishandling and potential damage during shipment.
The WFS 1545 is shipped in two crates. Inspect both crates and report any damage to the carrier
and the OEM before proceeding. The larger crate contains the base skid with filters and pump.
The electrical control panel is strapped to the chiller support structure and ships with the base
skid. A smaller crate contains the chiller unit.
The outside of the crates should be inspected for damage prior to uncrating. Additionally, “Tip and
Tell” and shock indicators are attached to the exterior. They should be inspected prior to
uncrating. If these indicators are missing or indicate that the crate has been subjected to
damaging shock loads or tipped, you should notify your carrier prior to uncrating.
Figure 3 shows the minimum door height clearance required to accommodate passage of the main
WFS platform prior to assembly.
FIGURE 2
NOTE: If necessary this side of the WFS can go
against a wall and filters accessed from the front.
