Im Martelacker 12 – D-79588 Efringen-Kirchen – Phone 0 76 28 - 91 11- 0 – Fax 0 76 28 - 91 11-90
E-Mail: [email protected] – Web: www.hs-technik.com
- 51 -
Regularly maintaining the tool ensures fault-free operation and increases
the service life of the wear and tear parts.
General information:
1.
Maintenance may only be performed by trained specialists.
2.
Only original HS-Technik replacement parts may be installed.
3.
Document maintenance work with
- the serial number of the tool
- the date
- they type of work performed
The following maintenance and control work must be performed at regular
intervals and in the event of high levels of contamination.
The tensioning head should be checked daily for wear and tear and
replaced if necessary.
Clean the contacts on the battery and PowerRiv
®
with alcohol or ethyl
alcohol.
The threaded mandrel should be cleaned daily (see page 50), to
remove dust and chips.
The tool must not be cleaned with grease-removing agents or water!
Label
DANGER
It is not allowerd to stick something on
the vent slots of the tool. Also it is not
allowed to block them otherwise.
