Im Martelacker 12 – D-79588 Efringen-Kirchen – Phone 0 76 28 - 91 11- 0 – Fax 0 76 28 - 91 11-90
E-Mail: [email protected] – Web: www.hs-technik.com
- 50 -
6.3.0. cleaning the Pulling head
1
2 3
Remove the battery prior to working on the
riveting device. Release and remove casing
(1).
To clean the threaded mandrel (2), pull back
the silver retention ring (3) and unscrew the
mandrel.
If the casing cannot be released manually, it
can be released using two SW24 wrenches.
These components can be cleaned with a
wire brush or a cloth. Abrasion chips should
be removed.
Then check the mandrel and replace if
necessary.
Then reassemble the device in reverse order.
