HS-Technik PRO-M Operating Instructions Manual Download

Page: 11 / 60

Im Martelacker 12 – D-79588 Efringen-Kirchen – Phone 0 76 28 - 91 11- 0 – Fax 0 76 28 - 91 11-90

E-Mail: [email protected] – Web: www.hs-technik.com

- 11 -

WARNING

The tool is designed using state-of-the-art technology and

according to recognized safety standards. Nonetheless,

operating the tool involves the risk of life-threatening injury to

the user, third parties or property.

DANGER

Work on this tool is to be performed only by a qualified

electrician. Inspect the tool‘s electrical components on

a regular basis. Repair loose connections and damaged

cables immediately. Remove the battery before performing

repairs on the tool.

WARNING

The tool may only be used:

• for intended purposes

• if it is in proper and safe working condition

NOTICE

The terms "tool" and "power tool" used in the safety information

refer to tools powered from a wall outlet (with power cord)

and battery-powered tools (without a power cord).

WARNING

The tool must always be kept locked away securely. Only

authorized persons are allowed access to the tool.

3.4.0. electRical hazaRdS

3.4.1. baSic Safety MeaSuReS

Summary of Contents for PRO-M





























































Search results

Summary of Contents for PRO-M

Reviews:

Related manuals for PRO-M

Brands by name

Popular brands

HS-Technik PRO-M, Operating Instructions Manual

Search results

Summary of Contents for PRO-M

Reviews:

Related manuals for PRO-M

Brands by name

Popular brands