Im Martelacker 12 – D-79588 Efringen-Kirchen – Phone 0 76 28 - 91 11- 0 – Fax 0 76 28 - 91 11-90
E-Mail: [email protected] – Web: www.hs-technik.com
- 14 -
c) Remove the battery before changing tool settings, replacing accessory
parts or storing.
By doing this, you can prevent the tool from starting accidentally.
d) Keep unused tools out of the reach of children.
Do not allow anyone to use the tool who is unfamiliar with it or has
not read this document. Power tools are hazardous when used
by unexperienced persons.
e) Maintain the tool carefully.
Make sure that moving parts are in good working condition and
do not jam, and check for broken or damaged parts that may impair
proper function. Ensure that any damaged parts are repaired before
using the tool. Poorly maintained power tools are responsible for
many accidents.
f) Keep tools clean.
Carefully maintained tools jam less frequently and are easier to
operate.
g) Follow these instructions when using the tool and accessories.
Take into account the working conditions and the work to be
performed. Using power tools for unintended purposes may be
hazardous.
h) Use the correct tool
Do not use tools with insufficient power to perform the task. Do not use
tools for purposes and work for which they are not intended.
i) Check your tool for damage
Before using the tool, check for damaged parts and ensure that safety
equipment is in good working order and functions as intended. Check
that moving parts are in working order and do not jam, that all parts are
properly mounted and none are broken, and that all conditions are
correct for operating the tool.
Damaged protective equipment and parts should be properly repaired
by a customer service workshop or replaced, unless this document
specifies otherwise. Damaged power switches must be replaced by a
customer service workshop.
Do not use a tool if the start switch does not function properly.
