Im Martelacker 12 – D-79588 Efringen-Kirchen – Phone 0 76 28 - 91 11- 0 – Fax 0 76 28 - 91 11-90
E-Mail: [email protected] – Web: www.hs-technik.com
- 24 -
4.3.4. Setting the nOSe Piece
The nose piece must be set for the blind rivet nut to be processed.
Screw on open blind rivet nuts manually until 1-2 threads are
sticking out from the nut. Lock the nose piece in this position
using the locking nut. When automatically winding, the threaded mandrel
should be flush with the blind rivet nut.
Screw on closed blind rivet nuts manually until it stops and then lock the nose
piece using the locking nut. When automatically winding, the nut should be
wound on ideally.
Open
blind river nuts
Closed
blind river nuts
Locking with
locking nut
NOTICE
These specifications are reference values and must be con
-
firmed in tests using the nuts applied!
Locking with
locking nut
Additional
fixture with
a screw
